Outline
Fader Configuration
32 + 1 (Master)
Mixing Capacity
Input Channels
48 (40 mono + 2 stereo + 2 return)
Aux Buses
20 (8 mono + 6 stereo)
Stereo Buses
1
Sub Buses
1
Input channel functions
8 DCA Groups
I/O
Inputs
32 mic/line (XLR/TRS combo) + 2 stereo line (RCA pin)
Outputs
16 (XLR)
Expansion slots
1
On-board processors
DSP
8 Effects + 10 GEQ
USB
34×34 USB Audio Interface, 2-track recording via USB Storage Device
General specifications
Sampling frequency rate
Internal
48 kHz
Signal delay
Less than 2.6 ms, INPUT to OMNI OUT, Fs=48 kHz
Fader
100 mm motorized, Resolution = 10-bit, +10 dB to –138 dB, –∞ dB all faders
Total harmonic distortion
Less than 0.05% 20 Hz–20 kHz @+4 dBu into 600 , INPUT to OMNI OUT, Input Gain=Min. (Measured with a –18 dB/octave filter@80 kHz)
Frequency response
+0.5, –1.5 dB 20 Hz–20 kHz, refer to +4 dBu output @1kHz, INPUT to OMNI OUT
Dynamic range
110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain=Min.
Hum & noise level
Equivalent input noise
–128 dBu typ., Input Gain=Max. (Measured with an A-Weight filter)
Residual output noise
–85 dBu, ST master off (Measured with an A-Weight filter)
Crosstalk
–100 dB (Measured with a –30 dB/octave filter@22 kHz), adjacent INPUT/OMNI OUT channels, Input Gain=Min.
Power requirements
100–240 V 50/60 Hz
Power consumption
120 W
Dimensions
W
866 mm (34.1in)
H
225 mm (8.9in)
D
599 mm (23.6in)
Net weight
20.0 kg (44.1lb)
Accessories
Quick Guide, Power Cord, CUBASE AI download information
Options
Expansion Card, Foot Switch (FC5)
Others
Operating temperature range: 0–40 °C, Storage temperature range: -20–60 °C